HVAC Pressure Switches & Micro Switches

Pressure and micro switches for furnaces, boilers, air handlers and condensers.

Why HVAC equipment depends on pressure and micro switches

HVAC systems use pressure and micro switches to prove airflow, monitor draft, detect blocked flues, control condensate and confirm that doors and panels are closed before a burner or fan starts. These are safety-related functions: a switch that drifts, sticks or fails open can stop a furnace from firing, while a switch that fails closed can allow unsafe operation.

Toneluck has supplied switches to appliance and automotive customers since 1976. For HVAC applications we combine pressure switch assemblies with snap-action, door and limit micro switches so a single supplier can cover the safety chain — pressure sensing, panel interlock and fan or damper position.

Typical HVAC applications

  • Furnace pressure sensing and draft proving
  • Boiler air pressure and differential pressure monitoring
  • Air handler and blower door interlock switches
  • Condensate and drain pan level switching
  • Damper and economizer position detection
  • Filter differential pressure indication

Typical specifications

Contact rating 0.1A to 16A (model dependent)
Voltage 125/250VAC, 12/24VDC options
Contact form SPST, SPDT, DPDT
Pressure range Low-pressure air sensing to several hundred Pa, model dependent
Operating temperature -40°C to +85°C standard; high-temperature versions available
Mechanical life Up to 500,000 cycles minimum on selected ranges
Approvals UL, cUL, ENEC, CE, CQC; RoHS and REACH compliant

Values are typical options across the Toneluck ranges. Confirm the exact datasheet for your model and application.

How to select the right switch

  • Define the sensed condition — positive pressure, negative draft or differential pressure, and the trip point.
  • Match the electrical load — burner controls and fan relays often switch inductive loads; allow margin over the steady-state current.
  • Choose the actuator and mounting — hose barb, panel mount or PCB terminals, depending on the air path.
  • Check the environment — temperature, dust, humidity and condensation determine whether a sealed or waterproof body is needed.
  • Confirm approvals — UL/cUL for North America, ENEC/CE for Europe, CQC for China.

Quality and supply

Switches are produced on automated assembly and test lines with in-line checks for operating force, travel and contact resistance. Automotive parts are manufactured under ISO 14001 and TS16949 systems, and products carry UL, cUL, ENEC, CE and CQC approvals. Samples and datasheets are available for evaluation before volume orders.

Recommended switches

Models for this application

These Toneluck models are commonly specified for this application. Ratings, actuators and terminals can be adapted for OEM programmes.

View all products
FAQ

HVAC Pressure Switches & Micro Switches questions, answered

What is an HVAC pressure switch used for?

It senses air pressure or draft in a furnace, boiler or air handler and confirms that the fan is moving air before ignition or during operation. If the pressure is outside the set point, the switch opens or closes the control circuit.

Can Toneluck supply both the pressure switch and the door interlock switch?

Yes. We manufacture pressure switch assemblies as well as door, limit and snap-action micro switches, which lets you source the full safety chain from one supplier.

Do you offer UL and cUL approved HVAC switches?

Selected ranges carry UL and cUL approvals, together with ENEC, CE and CQC for other markets. Tell us the target market and we will confirm the approved model.

What is the typical life of a Toneluck HVAC micro switch?

Selected ranges are rated for up to 500,000 mechanical cycles minimum. Electrical life depends on the load; share your switching current and we will recommend the appropriate model.

Can you provide samples for testing?

Yes. Once the specification is confirmed we provide samples for evaluation; the buyer covers shipping.

Do you support custom pressure set points?

Custom set points, hose connections and mounting brackets can be developed with our engineering team for volume projects.

Need a switch that fits your design?

Send us your drawings, ratings and volume. We will recommend the closest platform and quote a custom sample.

WhatsApp